Specification Selection of Down and Feather Filling Machine When Offering an Order
(1) Selection of fan with internal brake
D type Fan with brake is the first choice: Out going of down and feather for filling must stopped two seconds after the machine is stopped. This kind of fan is good enough to keep both the product and the site clean and to reduce the loss of down and feather. But it is high in price.
C type Fan without internal brake is selectable for self-employed persons and small workshops to reduce investment. It does not stop running during operation and is fast in filling speed. However, the site is difficult to keep clean and tidy because there is still little down being blown out 30 seconds after it is switched off.
E type fan with a frequency inverter, if selected, is easy
to adjust its wind force as required. Low wind force can be adopted when filling clothes or down and feather to decrease the damage of down and feather; strong wind force can be selected when filling pillows or big feather pieces to minimize the blockage of the filling pipe. It saves energy and power. It can save power by 1/3 than conventional down and feather filling machine. The fan’s soft start produces less impulse on the power source when it starts to run. Even a 5- ampere single phase electric meter can be adopted. It is quick to stop. It can stop down and feather being blown out within 1 second after the fan brake is applied. Thus it is easy to keep both the product and site tidy. It can be used in shop as a piece of equipment for on-spot filling of down and feather quilts. It can also be combined in a large scale production line in factory.
(2) Selection of down and feather holding box
Down and feather holding box with the size of 620 x 520 x 750 (mm) can be selected for shops. It weighs about 6 kg., occupies less area.
Big down and feather holding box with the size of 650 x 550 x 750 (mm) can be adopted for factories. It weighs about 8 kg, can hold more down and feather.
(3) Selection of down and feather filling pipe
Down and feather filling pipe with hard joint is preferred in big workshops because it’s convenient, fast, solid and endurable. It is not easy to get blocked because of its smooth inside wall.
Down and feather filling pipe with soft joints can be adopted even in shops or in other narrow places because it is flexible to turn around. But the resistant force during the filling process is big. The joint has a working life of about two years.
Down and feather filling pipe with a diameter of 28 mm is suitable to fill the collar, front edge and other narrow parts of down and feather clothes.
Down and feather filling pipe with a diameter of 50 mm is suitable to fill bar type quilts.
Down and feather filling pipe with a diameter of 32--38 mm is suitable to fill square block type quilts.
Fan outlet with a diameter of 76 mm is suitable to fill pillows with feather.
The bigger the pipe is, the fast its filling speed and the less tendency to get blocked.
Down and feather filling pipe with sieve holes should be adopted to fill down and feather into products made of air tight textiles.
(4) Down and feather filling machine for quilts can also be used to fill small batch of pillows. For machines specially used to fill pillow and cushion, please select filling machine for pillow ( chemical fiber filling machine ). Its filling speed of the motor doubles that of filling machine for quilt.
Clothes feather filling machine doesn’t have the synthetic glass filter vat. So the filling mouth is lower, only 650mm high from the floor. Workers can sit filling the feather. The filling pipe is thin, short and with a sieve vessel, applicable for airtight nylon cloth, sleeping bags, gloves and clothes.
QF-2 Strapped Clothes Feather Filling Machine
Use the compressed air to fill the feather clothes. It is applicable for the filling of strapped feather clothes.. One electric scale, two filling mouths, and three operating workers, enables the machine to fill one stripe in 4 seconds without blockage. It’s the fastest and most efficient machine with the best cost performance.
It’s best to fill less than 5g feather at one time, and make the diameter of the filling pipe less than 14mm. If it’s more than that, it still works, but the effect is worse. We suggest using LZB-15EF filling machine and ACS-50 feather-holding box, they can lessen the energy consumption.